Home  |   Contact Us

Search
Find a Store:
Enter Your Zip Code
 
 
 
 
 
  You are here: HOME  > Products
  Duron Paints & Wallcoverings: DURA Crete™ — Primers

DURA Crete™ — Primers

DURA Crete™ — Primers LogoThese ultra-premium DURA Crete products serve as excellent primers for uncoated concrete block substrates.

Review each product description below to select the product that best suits your project application needs.
- Material Safety Data Sheet (English) - Material Safety Data Sheet (Spanish)
- Technical/Product Data Sheet - Environmental Data Sheet

Colors below marked in bold are considered a primary color. If color choice is unknown, data sheets in this color should be viewed.

Dura Crete Exterior 100% Acrylic Sprayable Smooth Filler/Finish
 
DURA Crete™ — Primers-Dura Crete Exterior 100% Acrylic Sprayable Smooth Filler/Finish Label Serves as a premium, 100% acrylic sprayable filler/base coat for use on properly prepared above grade new or uncoated concrete block/CMU construction as part of a complete Dura Crete Exterior Texture Coatings system. With proper application, this product fills and helps to level uneven surfaces and provides a smoother base to enhance the coverage and hold-out of subsequently applied Dura Crete texture coatings.
 
Color Product # Data Sheets
White Tintable Base 16-400            

Product Attributes:

  • High Build
  • Weather Resistant
  • Mildew Resistant
  • Available in OTC and Non-OTC areas

High Performance Acrylic Block Filler - White
 
DURA Crete™ — Primers-High Performance Acrylic Block Filler - White Label This product has excellent application characteristics, is highly alkali-resistant, and can be applied down to 35 degrees Fahrenheit. Ideal for uncoated concrete block in non-wet areas (not for use in showers or car washes). This product was created as a high-performance acrylic block filler for use under architectural house paints and select industrial coatings.
 
Color Product # Data Sheets
White DU0016110            

Solventborne Waterproof Cement Fortified Filler Coat
 
DURA Crete™ — Primers-Solventborne Waterproof Cement Fortified Filler Coat Label This solvent-based synthetic polymer coating is fortified with portland cement and is especially formulated to waterproof and fill interior and exterior above or below grade regular density, splitface and fluted concrete block. Can be used in conjunction with DURA Crete Exterior 100% Acrylic Texture Coatings, and for ultimate waterproofing, with DURA Crete High Build Solventborne Waterproof Coatings or MAXFLEX Elastomeric Waterproof Finishes. It can also be used on concrete block beneath industrial topcoats, including those that contain strong solvents such as xylene or toluene.
 
Color Product # Data Sheets
White DU0016410            

Waterborne Acrylic Masonry Primer - White
 
DURA Crete™ — Primers-Waterborne Acrylic Masonry Primer - White Label This product is a high performance primer coating specifically formulated for above-grade masonry surfaces, both interior and exterior and can be applied down to 35 degrees Fahrenheit. It has excellent adhesion to masonry and other surfaces that have a pH of 6 to 13. Proper use better assures the long-term performance of latex paints as well as masonry and elastomeric coatings.
 
Color Product # Data Sheets
White DU0016200            

Product Attributes:

  • Contains Mildew resisting component
  • Excellent Adhesion
Product Attributes:
  • Alkali-Resistant (resistant up to and including a pH of 12)
  • Withstands Wind Driven Rain when Topcoated
  • Excellent Application by Brush, Roller and Spray
  • Ultra-Premium Products for Masonry
  • Solventborne Waterproof Cement Fortified Filler Coat can be applied over Dry & Slightly Damp Surfaces
  • Available in OTC & Non-OTC Areas
© 2010 Duron Paints & Wallcoverings Home |  Careers |  Store Locator |  Contact Us |  Site Map