Home  |   Contact Us

Search
Find a Store:
Enter Your Zip Code
 
 
 
 
 
  You are here: HOME  > Products
  Duron Paints & Wallcoverings: DURA CLAD ® — Urethanes

DURA CLAD ® — Urethanes

Urethanes LogoDURA CLAD Urethane Coatings are designed for industrial and commercial applications where long-term performance and superior color and sheen retention are a must. These coatings are ideal for a wide range of application conditions and surface preparation.
- Material Safety Data Sheet (English) - Material Safety Data Sheet (Spanish)
- Technical/Product Data Sheet - Environmental Data Sheet

Colors below marked in bold are considered a primary color. If color choice is unknown, data sheets in this color should be viewed.

Dura Clad 950 Pre-Catalyzed (Single Component) Waterborne Urethane, Gloss
 
Urethanes-Dura Clad 950 Pre-Catalyzed (Single Component) Waterborne Urethane, Gloss Label This revolutionary, single-component waterborne gloss urethane offers the abrasion resistance of conventional alkyd gloss enamels and the superior exterior color retention and chalk resistance characteristic of silicone alkyd enamel. Use this product on properly prepared interior and exterior metal, masonry, plaster, drywall and interior wood.
 
Color Product # Data Sheets
White Base * DU9020000            
Deep Base * DU9020001            
Neutral Base * DU9020002            

Product Attributes:

  • Non-yellowing
  • Low Odor
  • Non-Flammable
  • Easy Clean Up
  • Available in Non-OTC and OTC Areas
* Color/Base To Be Discontinued (once stock runs out).

Sherwin-Williams ArmorSeal Rexthane™ I Floor Coating Gloss
 
Urethanes-Sherwin-Williams ArmorSeal Rexthane™ I Floor Coating Gloss Label A high solids, single component, VOC compliant, moisture resistant heavy-duty polyurethane floor finish for industrial, commercial or marine applications. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings.
 
Color Product # Data Sheets
Clear B65C00060            

Product Attributes:

  • Interior or Exterior
  • Impact, Abrasion and Chemical Resistant
  • Fast "hardness" Development
  • Meets ADA Requirements For Slip Resistance for Floors
  • Suitable for use in USDA Inspected Facilities

Sherwin-Williams Corothane® I MIO-Aluminum
 
Urethanes-Sherwin-Williams Corothane® I MIO-Aluminum Label A single component, VOC compliant, moisture curing, aluminum and Micaceous Iron Oxide (MIO) filled, urethane primer, intermediate coating or finish for use in over prepared surfaces in industrial environments.
 
Color Product # Data Sheets
Aluminum B65S00014            

Product Attributes:

  • Excellent Adhesion to Most Substrates
  • Low Temperature Application – down to 20 F
  • Excellent Durability
  • Outstanding Corrosion, Chemical and Abrasion Resistance
  • Recoat up to 30 days

Sherwin-Williams HydroGloss Single Component Waterbased Urethane
 
Urethanes-Sherwin-Williams HydroGloss Single Component Waterbased Urethane Label A single component, high performance, acrylic/polyester waterbased urethane for interior or exterior use over primed or properly prepared steel, concrete or aluminum.
 
Color Product # Data Sheets
Clear Tint Base B65T00184            
Extra White B65W00181            

Product Attributes:

  • Abrasion & Chemical Resistant
  • Excellent UV Resistance
  • Color & Gloss Retention
  • Low Odor, VOC Compliant

Sherwin-Williams Sherthane® 2K Urethane Gloss
 
Urethanes-Sherwin-Williams Sherthane® 2K Urethane Gloss Label A two component, VOC compliant, aliphatic acrylic modified polyurethane designed for use in over prepared substrates in "high visibility" industrial environments.
 
Color Product # Data Sheets
Clear Tint Base, Comp A B65T00154            
Comp B B65V00150            
Extra White/Tint Base, Comp A B65W00151            

Product Attributes:

  • Chemical & Abrasion Resistant
  • Heavy Duty Maintenance Coating
  • Suitable for use in USDA inspected facilities
© 2010 Duron Paints & Wallcoverings Home |  Careers |  Store Locator |  Contact Us |  Site Map