Home  |   Contact Us

Search
Find a Store:
Enter Your Zip Code
 
 
 
 
 
  You are here: HOME  > Products
  Duron Paints & Wallcoverings: DURA CLAD ® — DTMs (Direct-To-Metal)

DURA CLAD ® — DTMs (Direct-To-Metal)

DTMs (Direct-To-Metal) LogoApplied to properly prepared surfaces, DURA CLAD DTMs can save both time and money by combining the priming and finishing coats into a single application.
- Material Safety Data Sheet (English) - Material Safety Data Sheet (Spanish)
- Technical/Product Data Sheet - Environmental Data Sheet

Colors below marked in bold are considered a primary color. If color choice is unknown, data sheets in this color should be viewed.

Dura Clad 300 'Direct-to-Metal' (DTM) Acrylic Gloss Coatings
 
DTMs (Direct-To-Metal)-Dura Clad 300 'Direct-to-Metal' (DTM) Acrylic Gloss Coatings Label This multi-purpose waterborne acrylic coating is ideal for application to properly prepared aluminum, galvanized metal, poured (vertical) concrete and ferrous metal in mildly corrosive environments such as offices, warehouses, distribution facilities and machine shops. It is ideal for the interior and exterior of concrete buildings, the exterior of steel tanks, and can be applied directly to galvanized metal substrates and metal buildings and roofs that have been properly prepared.
 
Color Product # Data Sheets
White Base DU9040301            
Black DU9040311            
Deep Base DU9040305            
Neutral Base DU9040307            
Safety Red DU9040312            
Safety Yellow DU9040313            

Product Attributes:

  • White, Black, safety colors and custom colors
  • Develops early moisture resistance
  • Semi-Gloss and Gloss Finishes
  • Available in OTC & Non-OTC Areas
  • Contains less than 100 g/L VOC

Dura Clad 350 'Direct-to-Metal' (DTM) Acrylic Semi-Gloss Coatings
 
DTMs (Direct-To-Metal)-Dura Clad 350 'Direct-to-Metal' (DTM) Acrylic Semi-Gloss Coatings Label This multi-purpose waterborne acrylic coating is ideal for application to properly prepared aluminum, galvanized metal, poured (vertical) concrete and ferrous metal in mildly corrosive environments such as offices, warehouses, distribution facilities and machine shops. It is ideal for the interior and exterior of concrete buildings, the exterior of steel tanks, and can be applied directly to galvanized metal substrates and metal buildings and roofs that have been properly prepared.
 
Color Product # Data Sheets
White Base DU9040401            
Black DU9040411            
Deep (Satin) Bronzetone DU9040029            
Deep Base DU9040405            
Neutral Base DU9040407            

Product Attributes:

  • White, Black, safety colors and custom colors
  • Develops early moisture resistance
  • Semi-Gloss and Gloss Finishes
  • Available in OTC & Non-OTC Areas
  • Contains less than 100 g/L VOC

Dura Clad 63 Direct-to-Metal Acrylic Bonding Primer
 
DTMs (Direct-To-Metal)-Dura Clad 63 Direct-to-Metal Acrylic Bonding Primer Label Designed to be a part of a system for coating pre-finished metal siding, other hard, slick glossy surfaces and previously painted surfaces, this primer is a waterborne, acrylic emulsion, adhesion-promoting bonding primer.
 
Color Product # Data Sheets
Off-White DU1A00630            

Product Attributes:

  • Corrosion resistant, but must be topcoated
  • Suitable for use in USDA inspected facilities
  • Available in OTC and Non-OTC areas
© 2010 Duron Paints & Wallcoverings Home |  Careers |  Store Locator |  Contact Us |  Site Map